Customized Design Plastic Bottle Filling Machine 5L - 10L Pure Water Drinking 1.6KW

Customized Design 5L- 10L Pure Water Drinking Plastic Bottle Filling Machine Price 1.6KW

--- Introduction---

1.When the bottles straight from the chain of humanitarian sent to the first machine rinser; the machine in motion, in the Under the action of cam, so that folder open bottle clip and contraction of the bottle rotated 180 degrees for washing and disinfection.

2.Continue to operate, the bottle returned to the original point of view. And the open clip, under the influence of the bottle in the Jog Dial to enter delivery systems. Then transported to the filling machine parts, filling machine parts has a photoelectric detection, the optical data into information to the PLC, PLC had instructed the cylinder block to block bottles .

3.Also, bottle filling machine rear cylinder block has also played, keep an empty bottle into the capping machine. Under the action of the program, filling the cylinder downward movement, so that within the filling valve into the bottle filling, until a certain time to stop filling, the cylinder block bottles back.

4.Filled bottle into the capping machine, capping machine from the rack, the justifications for cover device, and even the composition of gland. Gland it is connected to the horizontal section of the dump under a certain angle, the constant movement when the bottle, put on caps. Then, the bottles with catchy article closely aligns with the gland, gland play a role.

5.The plastic bottle filling mchine , It adopts PLC and touch screen automatic control, and has the advantages of accurate filling, advanced structure, stable operation, low noise, large adjustment range and fast filling speed.

6.The machine was design and manufactured by Reliable, especial for liquid from thin viscous to high density liquid, such as water, oil, lotion, cream, Jam, sauce, honey, ketchup and so on. It is mostly used in the industry of chemicals, foodstuff and pharmaceuticals.

--- Feature---

1. 304 Stainless steel construction , and the liquid contact parts are 316L stainless steel.it is based on you.
2. Schneider PLC and touch screen control for you
3. Servo motor Driven, one servo motor drive one piston, high speed and high accuracy.
4. No bottle ,no fill, automatic alarm for the warning.
5. The filling blocked nozzles are anti drops, silk, and auto cut viscous liquid
6. Easy to maintain, no special tools are required.
7. Diving nozzles for bottom up filling of foaming products if need
8. Bottle mouth can be located if need

--- Inside Details Introduction---

Washing Part

1. Main shaft turned 180degree under gear wheel.

2. Let bottle’s mouth face to land, jetting water into bottle, after a few seconds, the main shaft will be back, than finishing the washing.

Filling Part

1. Washing finished bottle is conveyed into filling position , cylinder push and hold the plate which can hitch bottles .

2. the time lasting of filling can be adjusted .

Capping machine

1. The working is intermission when running.

2. There are six positions for capping, and have 1 capping head, can automatically cappin.

---Technical Paraments---

Zhangjiagang Reliable Machinery Co., Ltd

Zhangjiagang Reliable Machinery Co., Ltd is a profeç manufacturer and exporter that is concerned with the design, development and production of Beverage Filling Machines. We are located in Zhangjiagang , Jiangsu , China. with convenient transportation access. Covering an area of 10000 square meters, we now have over 80~100 employees, boast an annual sales figure that exceeds USD10,000,000 and currently export over 80% of our production worldwide.