
Features of main body:
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which
improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area
in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the
proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the
production into a perfect safe environment, in case of the
breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and
noise.
7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the
blowing and action into three parts in the air pressure diagram of
the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Two ways of operating: Automatic and manual.
10). Safereliable and unique design of the position of valve to make the pneumatic diagram in the
machine easier to understand.
11). Low costhigh efficiency easy operation and maintenance etc, profited from the fully automatic
technological process.
12). Ideal cooling system make the finished bottles without any
flaws.
13). Easy for you to install test and start up.
14). Low rejection rate: Less than 0.2 percent
Technical parameter
Capacity | 800-1000pcs/hr |
Volume of product | 100ml-2000ml |
Structure | Including 2 main machines and 1 infrared oven. |
Preform length | 15mm-350mm |
Preform inner diameter | φ5mm-φ38mm |
Main machine size (L x W x H) | 160x60x161cm |
Main machine weight | 500Kg |
Infrared oven size | 187x63x145cm |
Infrared oven weight | 250kg |
Power | 17.5kw |
Flow capacity | 1.0m³/min |
W.P | 3.0Mpa |
Inlet temperature | ≤80℃ |
Dew point | 23℃ |
Ambient temperature | ≤38℃ |
Power supply | 380V/50HZ |
Compressor power | 0.75kw |
Cold medium | R22 |
High Pressure Air Compressor Unit
Air compressor | 1.2m³/min |
Volume | 1.2m³ |
Pressure | 30Mpa |
Speed | 620r/min |
Power | 15kw |
Tank volume | 0.15m³ |
Overall dimension | 2000mm*1100mm*1600mm |
Weight | 620kg |
Zhangjiagang Jinyate Machinery Co., Ltd
Zhangjiagang Jinyate machinery Co., Ltd is located
Leyu Town, Zhangjiagang City , Jiangsu Province,We devote
ourselves to the development, research and production
of beverage filling and packing industry.
Our main products include: Mineral water,purified water,drinking
water filling production line;Juice,tea hot filling production
line;Carbonated beverage filling production line. 3
gallons& 5gallons filling production line;beverage can filling
production line.We also provide various auxiliary equipment of
production line. We can help you to design the product line, workshop and provide
turn-key project.
Our products are sold well in every province and city of the whole
country and also exported to about thirty countries and areas with
strong technical force, advanced equipment, scientific management
system and perfect after-sales service.
Welcome to visit our company.Thank you!